Page Views: 98 Date Added: 10/04/2011 Last Updated: 10/04/2011 Expiry Date: 10/01/2021 Product/Service Details High temperature MoSi2 Heating Elements The leading products of the company Molybdenum Disilicide Heating Element Type TC-1700 and TC-1800 elements are high-tech products researched and developed by experts from China and abroad. MoSi2 heating element can quickly form a thin and adhesive anti-oxidizing layer of quartz glass (SiO2), under the high temperature oxidizing condition. If the protective layer was damaged, the element can reform a new one, so MoSi2 heating elements have a very good anti-oxidation properties, it also means that the heating element can be used on operation for a much longer time than the traditional one. The resistivity of the Mosi2 heating element is not changing with the time, so a new one can be installed without effecting the old one. This can result of the huge saving in furnace maintenance fee sand time as well, increase the working efficiency. This is the key point of Mosi2 heating element being a better material and being widely used. 1) Surface Load: According to the structure, the temperature and atmosphere in the correct choice of components surface load is the key element to the highest life, based on the thermal radiation components uncrossed circumstance temperature, temperature and surface load components, the shaded part for common surface load - - - - - the temperature range. 2) Electric properties: MoSi2 heating elements of resistivity become large with larger temperature, under normal circumstances length won’t change with the use time, so the old and new elements can be mixed use. Installation: MoSi2 heating elements at room temperature, temperature and brittle plasticity, so there is best vertical u-shaped stick, if need to install hanging installation, please choose high level support, refractory MoSi2 heating element placed. Component part must extend to taper chamber, silicon molybdenum rods fixture cannot too tight a twist to heat, stay components, again, this is broken lock components, (with my suggestion: please select the company is equipped with special jig and roof insulation wire), and general stove temperature can’t exceed 300 degrees Celsius. Chuck wires contact with components should be less than 0.1 V voltage, in order to avoid the radiation heat to chuck, chuck and brick bottom of distance above should be not less than 50mm. φ6 elements can’t be used in 170A for long-term use, φ9 components can’t be used in 300A for a long time.

Company Information (Dengfeng City Yuhao High-temperature Component Co., Ltd)

Company Profile: Our company is experienced in producing high-temperature components and our main exporting products are sic heating element and mosi2 heating element. With complete quality management systems, advanced equipment, good production environment, strong technique power and complete testing facilities, we produce molybdenum ejectors, molybdenum wires, molybdenum crucible products, molybdenum electrodes, molybdenum bars and others. We have got ISO9001:2008 quality system authentication. We are one of the largest suppliers of this industry in China. With 150 tons of annual output, our products are sold well and enjoy a good fame in domestic and abroad.. >> More Website URL: http://www.bridgat.com/u46549