1. Main Processor CSM1200 (220MHz)
2. Memory 8 MB
3. SDRAM 128 MB
4. Base Linux operating system
5. Most popular Middleware embedded suppoted
6. High sensitivity, low Eb/No for receive Digital Television
7. Up to 1080P video resolution supported
8. Multi-bilingual OSD language , audio language and subtitle language supported
9. USB 2.0 interface for MP3 & JPEG playback, PVR and software upgrade
10. Record digital television FTA program to a USB Flash Drive or an external USB portable hard disk and playback via USB2.0
11. Low Power mode
Product Description ：
Tuner
Input Connector IEC 16902. Female
Input Frequency Range VHF&UHF
Num of RF Inputs 1
Input impedance 75 ohm
Input Level -78 dBmV ~ -20 dBmV
RF output Connector (bypass)IEC 169-2 Male
Loop through 47-862 MHz
Demodulation
Standard ETSI EN300 744
Guard interval Modes 1/32,1/16,1/8 Active Symbol duration
FEC Modes Rate 1/2,2/3,3/4,5/6,7/8
Carriers/Constellation All modes supported including non hierarchical
Demodulation COFDM(QPSK/QAM16/QAM64) 2K and 8K
Network MFN/SFN
Channel bandwidth 7 and 8 MHz wide channel 21-68PLL
Video Decoder
Standard ISO/IEC 13818-2 and ISO/IEC 14496-10
Transport stream ISO/IEC 13818-1
Video decoding MPEG-2 SD/HD (MP@ML and MP@HL), MPEG-4 SD/ (Main Profile Level 3 and High Profile Level 4)
Video resolution 576I, 576P, 720P, 1080I (1080P Option)
Aspect ratio 4:3, 16:9,AUTO
Audio Decoder
Standard ISO/IEC13818-3 TR1011154
Audio decoding MPEG-1 and MPEG-2 Layer I & II, Dolby Digital Audio and HE-AAC Digital Audio
Dolby Digital (AC-3) Stereo down-mixing to analog and digital audio outputs (including HDMI).
For digital outputs, L-PCM stereo encoding is provided
Sample rate 32 kHz, 22.1 kHz, 44.1KHz,48 kHz
Rear Panel
CVBS outputs 1 CVBS video output
Audio CINCH 2 Analog Audio L/R connectors (white/red color)
Optical S/PDIF Digital Audio output
YPbPr outputs Analog HDTV video output
SCART TV SCART and VCR SCART
HDMI Digital HDTV video output with HDCP. HDMI version 1.1 or later USB USB2.0
LAN (Option) RJ-45 10M/100 Base-T
Front Panel
bi-colored LED Red / Green to indicate the various states of the STB
7-segments LED To display the channel number or/and other information
Keys 7 keys (Standby, P+, P-, V+, V-, Menu, OK)
Accessories
Remote control unit IR (36kHz) RC3 / other on request (38kHz)NEC
Batteries 2 x AA R6 type
User Manuel 1 in English and Chinese
L/R Cinch cable 1
RCA cable 1
Power
AC input range 230V ~+/-10%, 50Hz
Power consumption 12W
Standby consumption 3W
Low Power mode (idle) 1W |
