DSE5510 module
DSE5510 module is a self-starting generator set control module, the module used to automatically start and automatically stop generating units, monitoring of a city electricity supply and automatically start the standby generator set instructions also state and fault conditions, the information through the LCD and front panel a flashing LED indicator light generating units operating instructions and the fault condition.
Selected operational procedures, timer and alarm, the user can be changed through the 810 interface and PC and use software to change system settings 5xxx, this interface can also be used as diagnostic equipment in real-time timer.
Synchronization and load distribution
Control module DSE5510 automatic synchronization and automatic load distribution functions, including automatic synchronization control, voltage, frequency matching, built-in synchronization table instructions, and at the same time and to the City without having to disconnect the load.
Simple control button operation
Module through the operation of the button panel to control:
Stop / reset, automatic, manual, start button
LCD display and events visit the Browse button to record
The first three buttons to provide LED status indication.
Features
DSE5510 control module has CANBUS option to meet the industry standard SAE J1939 'eco-friendly' engine management system to provide engine protection and instrumentation without requiring additional sensors.
Can be selected through the RS232 communication port to achieve complete remote communications, the RS232 modem can be provided through the PSTN telephone line or GSM network connection to a computer. Modules can also make use of GSM cellular mobile phone wireless phone network to a short message function of the alarm system engineers.
Advanced communications port to allow more than 16 units operating in parallel, and in accordance with the requirements of electricity automatically start, automatic shutdown, automatic synchronization, automatic distribution of load.
May choose to meet the "MODBUS" agreement RS485 output. The use of industry standard communication protocols to allow the entire system or integrated into a new management system for existing buildings and control programs.
May choose to meet the "MODBUS" agreement RS485 output. The use of industry standard communication protocols to allow the entire system or integrated into a new management system for existing buildings and control programs.
PIN password protection before the board can be programmed to choose the escape point and the timer, allowing the field to change the module settings.
Clear engine diagnostic data, remove the need for services equipment and confidential diagnostic lights (when connected together with the use of J1939).
Built-precision timer, can be set weekly or monthly.
Nine auxiliary input can be configured for connection to external fault detection device.
Output can be set for five other design needs.
Based on the 4 line LCD text display, can provide 'at a glance' diagnosis of fault conditions, instrumentation and operation of the state.
LCD can be used a variety of languages (English, French, Spanish, German, etc.)
Voltage measurement range of up to 22,000 volts can be used to provide input transformer (VT's). |
