The seller is currently Offline

Page Views: 255 Date Added: 01/15/2009 Last Updated: 08/21/2009 Expiry Date: 01/11/2028 Product/Service Details Copolymer of vinyl chloride and vinyl isobutyl ether MP45 Structure Formula : Product Specification Main index sign MP45 Viscosity mpa.s 40-50 Chlorine mass fraction ％ 44±1 volatile ≤ ％ 0.3 viscosity of a 20 % solution in toluene at 23 °C ( 73 °F )(ISO 3219, DIN 53019/53214,shear rate=500s-1) Application MP resins are binders resistant to hydrolysis. They can be used for anti-corrosion coatings, for coatings on galvanized steel, other non-ferrous metals, concrete, fiber cement, for road marking paints, flame-retardant coatings on non-flammable building materials, printing inks, marine and container paints. They are compatible with most alkyd resins, dry oils, polyacrylic resins, liquid epoxy resins, tars and bitumens. MP resins offer advantages to both manufacturers and users of coatings: ◆broad choice of solvents, particularly budget-priced blends of aromatic and aliphatic hydrocarbons ◆ good compatibility with other coatings raw materials ◆ good pigment binding capacity even at high solids ◆ unrestricted choice of pigments and extenders ◆ easy application by all common techniques, no cob-webbing even at high solids ◆ thermal stability allows force drying ◆ good adhesion on iron, steel and many unrelated coatings systems, good intercoat adhesion ◆ good resistance of properly formulated coatings to aqueous alkalis and acids, salt solutions, to stress from water, humidity changes, low and cyclic temperatures as well as to chalking and yellowing ◆ long lasting corrosion protection even under extreme outdoor conditions Safety The normal precautions relating to handing chemicals and local regulations on industrial hygiene must be observed. The place of work must be well ventilated, skin care measures should be adopted, and safety goggles should be worn . Packing and shipment Packing: 20KGS per plastic bag. Storage: Sealed and stored under a cool and dry condition. Additional photos

Company Information (Zhejiang Jinhua New Material Co., Ltd.)

Company Profile: Zhejiang JinHua New Materials Co. Ltd was founded in December 2007. It precursor is Quzhou Jinhua Chemical Co. Ltd. The initial capital is RMB 30 million. Zhejiang JinHua New Materials Co. Ltd is a joint venture by Zhejiang Unite Invent Industrial Development Co. Ltd and Juhua Group Corporation, and it devotes itself to developing, producing fine chemical products. In June 2009, in order to better participate in international and domestic competition、 enhance the image of the company and promote future development ,the company increased endowment and changed its name and  type to Zhejiang JinHua New Materials Co. Ltd, at the same time, the registered capital extended to RMB 80 million. Scope of Business: producting Methyl ethyl ketoxime、 vinyl isobutyl ether、 epichlorohydrin resins、hydroxylamine sulfate and so on, marketing, technology development and services. Zhejiang JinHua New Materials Co. Ltd located in Quzhou High-Tech Industrial Park Sino-Russian High-tech Zone, It is next to Juhua Group Corporation, which is  the oversize state-owned enterprise, the largest fluorine chemical industry base and the largest chemical industrial base in Zhejiang Province. Here transportation is convenient, the public and auxiliary facilities are perfect. The company has domestic advanced technology and resource superiority, and it devotes itself to the research and manufacture of high-tech products. The application of high-tech achievements in production is constantly been enhanced, which make the company has inherent capacity for growth and development in organic chemical industry and fine chemical industry. With the introduction and absorption of new techniques, The company will focus on industrial upgrading, green environmental protective, lowering production cost for efficiency, and gradually achieve the goal of making the company bigger and stronger.. >> More Website URL: http://www.bridgat.com/u731