Page Views: 184 Date Added: 08/16/2010 Last Updated: 08/16/2010 Expiry Date: 08/11/2029 Product/Service Details ZQ-A series, newly developed by our company, is a two-step automatic blow-molding machine, which requires labor to put performs into the preheater only. ZQ-A series is of one cavity and the maximum cavity of the bottles is 0.6L,1.5L,5L. It can blow various bottles in shapes: carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET, PP etc. Compared with other full-automatic series, ZQ-A series has no automatic conveyer, so it can’t transfer performs automatically, but requires labors to put performs into preheater. The distinctive feature of the ZQ-A is as follows: it has saved the cost to the maximum extent; it has lower rejection rate, higher production, and more stable performance than the semi-automatic one, and moreover, it is easy to run. Therefore, it will take the place of the semi-automatic blow-molding machine. Settings: a).PLC colour display: OMRON(JAPAN) b).Pneumatic parts:FESTO(GERMANY) c).Controller of preform transfer:Servo motor National(JAPAN) d).Other electric parts are all world-famous brand Features: A. Stable performance with advanced PLC. B. Conveying preforms automatically with conveyor. C. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater. D. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus. E. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure. F. No contamination and low noise with the air cylinder to drive the action instead of the oil pump. G. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine. H. Strong clamping force with high pressure and double crank links to lock the mold. I. Two ways of operating: automatic and manual. J. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand. K. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process. L. Contamination is avoided for the bottle body. M. Ideal effect of the chilling with the chilling system. N. Easy installation and starting O. Low rejection rate: less than 0.2 percent. TYPE ITEM ZQ-A600 ZQ-A600-2 ZQ-A1500 ZQ-A1500-2 ZQ-A5000 CONTAINER Number of cavity 1 2 1 2 1 Output 1100-1400pcs/hr 1700-2300 pcs/hr 1000-1300 pcs/hr 1700-2100 pcs/hr 500-700 pcs/hr Max.container volume 0.6L 0.6L 1.5L 1.5L 5L Max.neck diameter 65mm 65mm 80mm 120mm 120mm Max.container diameter 86mm 86mm 105mm 200mm 200mm Max.container height 260mm 260mm 350mm 350mm 350mm ELECTRICAL SYSTEM Number of lamp 14pcs 28pcs 28pcs 28pcs 28pcs Max.heating power 23kw 23kw 23kw 23kw 42kw Installation power 25kw 25kw 25kw 25kw 44kw Actual power consumption 16kw 16kw 16kw 16kw 16kw AIR SYSTEM Operatating pressure 7kg/c㎡ 7kg/c㎡ 7kg/c㎡ 7kg/c㎡ 7kg/c㎡ Low pressure consuming 800Ltr/min 1000 Ltr/min 900 Ltr/min 1200 Ltr/min 1200 Ltr/min Blowing pressure ≤40kg/c㎡ ≤40kg/c㎡ ≤40kg/c㎡ ≤40kg/c㎡ ≤40kg/c㎡ High pressure consuming 1200-1600Ltr/min 1500-2000Ltr/min 1200-1600Ltr/min 2000-2500Ltr/min 2000-2500Ltr/min CHILLER WATER Operating pressure 5-6 kg/c㎡ 5-6 kg/c㎡ 5-6 kg/c㎡ 5-6 kg/c㎡ 5-6 kg/c㎡ Temperatuer 10℃ 10℃ 10℃ 10℃ 10℃ Consuming 3600kcal/hr 5600kcal/hr 3600kcal/hr 5600kcal/hr 5600kcal/hr Flow rater 20Ltr/min 30Ltr/min 20Ltr/min 30Ltr/min 30Ltr/min MACHINE Machine dimension 2.0×1.35×1.7(m) 2.1×1.35×1.7(m) 2.1×1.5×1.7(m) 2.2×1.8×1.7(m) 2.2×1.8×1.7(m) Machine weight 1.5T 1.8T 1.6T 2.0T 2.8T

Company Information (Tincoo Machinery)

Company Profile: TINCOO Machinery-Zhejiang East Zhouqiang Plastic & Mould Industry Co., Ltd.. Established in 1989, is a professional supplier devoted to the designing & production of big-scaled and multi-layer extrusion molding machine. Our advantages are high quality, reasonable price and excellent service. The company is located in the mold town--Huangyan, with total investement of 88 million RMB, covering a total area of 50,000 M2. Machines from the company are mainly for export, and have been exported to more than 80 countries in Asia, Mid-East, Europe, Africa, Australia, and Latin-America. The marketing network has covered all over the world. With honesty & sincerity as our business style, and Innovating and striving as our management concept, we have survived in the fierce market competition with our super quality and advanced technology. We are expanding through serving our customers. TINCOO will be devoting to researching & developing new products. Right now, we can offer fully-auto extrusion molding machine with 2 to 7 layers and max.8 die heads for 1ml to 1000L. We are the first one in China who has manufactured machine for 7-layer products. We are expecting to meet more new friends and would like to help our friends with our technology & service. Focused on customers, cored on quality, the corporation and customers are viewed as a united whole. Customers' requirements are all we should do．. >> More Website URL: http://www.bridgat.com/u20037